Monday, December 13, 2010

Mold flow analysis


The case is a fairly complex part, as far as injected-molded plastic parts go.

Getting the mold to fill evenly is a bit of a black art.  The plastic starts to cool as soon as it starts to flow into the mold.  As a result, the leading edge of the injected plastic immediately begins to thicken.  There is a limited time in which the mold can be filled, and the part made.

Here is an animation of the mold filling with hot ABS plastic.  As the color runs from cool (blue) to hot (red) you can see how the plastic part is formed.

Click on the image to see the animation.



7 comments:

  1. Can't the mold be heated, so that the plastic won't cool off?

    ReplyDelete
  2. it is heated (look at the big hoses in the other photos), but the plastic still cools along the leading edge

    ReplyDelete
  3. Mold can really become a major problem when not dealt properly in time. It can make people ill, especially to elders and children. So, it is very important to call an expert as soon as any kind of mold problem is found in the building.Mold Specialist Brooklyn

    ReplyDelete
  4. Awesome post! This is helpful post. This article is clear and with lots of useful information. as we provide blow molding manufacturers at affordable prices. for more info visit our website.

    ReplyDelete
  5. Die Informationen, die Sie zur Verfügung gestellt haben, sind sehr gut und für alle wichtig. Teilen Sie diese Art von Informationen weiter. Vielen Dank. schimmel im aquarium

    ReplyDelete
  6. Mardi Gras Casino & Hotel in Las Vegas, NV - Mapyro
    Mardi Gras Casino & Hotel is a 5-star Las Vegas casino with 2,140 세종특별자치 출장샵 slot 광양 출장샵 machines and 25 table games. The Mardi Gras casino 목포 출장샵 is a Wedding Venue in the centre  전라남도 출장안마 Rating: 영주 출장샵 4.6 · ‎5,440 reviews

    ReplyDelete
  7. Mold flow analysis is crucial for achieving uniform filling and optimal part quality in injection molding. It involves simulating the flow of molten plastic within the mold cavity to predict issues like uneven filling, air traps, or cooling problems. Key factors include flow simulation, cooling analysis, warpage prediction, gate and runner design, material selection and parameters, and iterative design. abogado planificación patrimonial

    ReplyDelete